How To Clean A Brita Pitcher (6 Easy Steps For Everyone)

Brita pitcher is one of the popular household tools. Its function is to purify and provide potable water. But if you don’t take care of it, you can drink contaminated water. Therefore, Brita pitchers need regular cleaning. 

However, it’ll be easy and won’t take long if you know the proper way to do it. So follow the simple steps in this article; you’ll never have to wonder about how to clean a Brita pitcher again. 

Keep reading on as we’ll describe each step in detail with helpful tips.

Things You Need Before Cleaning A Brita Pitcher

Make sure you have the following items around you before you start cleaning your Brita pitcher:

  • Warm water
  • White vinegar
  • A bowl
  • Paper towels
  • A clean drying rack
  • A cleaning sponge
  • Mild dish soap: Choose mild and non-abrasive liquid dish soaps such as Joy, Palmolive, and Dawn.
  • A brand new filter (optional): You’ll need this if you plan to change your filter. Brita recommends replacing the standard filter every 40 gallons or 2 months and the Longlast filter every 120 gallons or 6 months.

As you might guess in the tool preparation, cleaning a Brita pitcher isn’t rocket science. You can find most of the essentials for cleaning Brita pitchers right in your home. However, if anything is missing, you can easily buy them at the nearest grocery store.

The most important thing you need to complete this task is absolute commitment to proceed with the job correctly.

Now it’s time to clean up!

6 Steps To Clean A Brita Pitcher

Before going any further, let’s be clear that the following guide is not limited to cleaning a Brita pitcher. You can clean most types of water filters just by following these simple steps.

Step 1: Dissemble The Pitcher

To get started, remove the reservoir and empty any remaining water inside. Then, disassemble the individual parts of the product. This step is essential as it ensures you have enough space for a deep scrub. However, this can be the hardest step in the whole process because this product is intricately designed.

Thus, when disassembling parts of the Brita pitcher, you should group them for easy reassembly later. The sequence of disassembling the parts is as follows:

One, remove the water filter:

  • If you do not need to change the filter, rinse it with warm water and then place it on a clean surface to avoid contaminating it. You won’t need it until you put the jar back together.
  • If you’re replacing the filter with a new one, you can remove the old filter from this step and replace it with a new one when you put everything back together.

Secondly, take the outer container to separate the lid and the reservoir. If you have trouble taking out the pitcher:

  • Put a flat chisel under the tab and twist the handle gently.
  • Then, the reservoir will open loose, and the pitcher will be out.

Step 2: Wash The Disassembled Pieces

Once you have successfully disassembled the pitcher, here comes the essential part. First, you should prepare a sufficient amount of cleaning solution to soak the disassembled parts above.

Attention here:

  • For Brita pitchers with electronic lid: Make sure not to submerge the lid in water.
  • For Brita pitcher with chrome lid: Gently wipe the lid with a soft cloth dipped in a mix of one teaspoon of vinegar and a cup of warm water.

As for the regular Brita pitcher, you can wash the lid and the reservoir at the same time:

  • Prepare a container full of warm water
  • Pour in some dish soap
  • Soak the lid and reservoir for 30 minutes to 1 hour for best results.

After waiting time:

  • Slowly take out the disassembled parts one by one.
  • Use a sponge to scrub each part of the lid wash and reservoir until they are clean. Or you can use a brush to easily clean hard-to-reach areas precisely.
  • Drain and rinse the parts by hand.
  • Wipe the reservoir clean with a soft cloth and thoroughly soak the water in the crevices of the lid.
  • Wipe the reservoir thoroughly from the inside to the outside.

Step 3: Remove The Mildew

Even after you’ve done a great job of washing, you may still notice some stubborn mold remaining. 

When in this situation, most people tend to use bleach to remove the green mold from the rims of utensils. However, using bleach comes with a multitude of side effects. Therefore, we recommend that you avoid using bleach altogether to clean your Brita pitcher.

Instead, do the following:

  • Mix a teaspoon of white vinegar with a cup of water in a bowl.
  • Dip a sponge in it to wipe the moldy areas until they are spotless

Step 4: Rinse And Let It Dry

Once you’re satisfied with the shiny finish, rinse the lid and the reservoir thoroughly with clean water, alternating between cool and warm. For best results, you should rinse each piece separately.

Next is the drying job. It would be best if you made sure that the lid and container are completely dry before reassembling. If you put it back while the parts are wet, you’ve created more room for future mold to build up. So you can choose either way:

  • Put them on the drying rack.
  • Turn them upside down on a dishtowel.

Attention here:

  • Be sure to place the parts to dry in an area with optimal airflow.
  • If you don’t have time to wait for natural drying, you can dry the parts with a paper towel. Paper towel avoids leaving fibers in the Brita pitcher parts.

Step 5: Prepare The New Filter

While waiting for the drying parts, you can use this time to prepare a new filter. Depending on the type of Brita pitcher you are using, it may or may not be necessary to immerse the prefilter in water. 

  • With older versions: You need to soak the filter for 15 minutes before use to wet and reactivate the system filter. 
  • With new versions: Usually do not require soaking the filter before use.

So ensure you follow the instructions that come with your particular Brita.

Step 6: Put The Pitcher Back Together

Once you’ve prepared the filter and everything is completely dry, it’s time to reassemble the pitcher.

And before using the Brita pitcher again:

  • Fill the pitcher with water and pour it out to remove the carbon dust hidden inside the pitcher’s rim.
  • Repeat this at least 3 times until you see clear water coming out and all the carbon dust is gone.

You’ll probably need to take some extra steps while reassembling the parts, depending on what Brita pitcher you’re using. Again, therefore, follow your given instructions.

By this step, you have a perfectly clean Brita pitcher.

How Often Should You Wash Your Brita Pitcher?

Brita pitchers are pretty easy to care for, and you don’t need to wash them every day. Instead, wash it every 2-3 weeks and at the same time empty the old water in the reservoir.

However, you must clean it immediately to ensure safe water to drink when you find out that it’s dirty. The 3 most obvious ways to tell a dirty Brita pitcher are:

  • Reservoir turning green: Indication of algae.
  • Smudges on the outside and inside of the lid: Indication of mold.
  • Sediment in the water: Indication of bacteria entering the reservoir.

Especially if you observe mold on the bottom, the best approach is to dispose of the moldy filter and replace it with a new one. In general, you should schedule a Brita filter change after an average of 40 gallons or every 2 months.

 Things To Avoid When Cleaning Brita Pitchers

Brita pitchers do not require much special care, other than:

  • Don’t put your Brita pitcher in the dishwasher: The pitchers are plastic and don’t stand up to boiling water. So, if you clean the pitcher in the dishwasher, the pitcher may melt or warp, and you won’t be able to continue using it.
  • Do not soak the filter in hot water: Hot water can release contaminants in your tap water. Additionally, submerging the device in hot water reduces the Brita pitcher’s ability to filter. If you have done so, replace the Brita filter to ensure the best water filtration.
  • Do not soak the filter with well water: Well water contains many bacteria, impurities, and harmful chemicals. If you soak the filter in well water, you’ve created the opportunity for the filter to absorb those impurities inadvertently.

Therefore, it’s best to soak the filter with municipally treated tap water for microbiological safety.


Rinsing your Brita pitcher will extend its life and eliminate any chance of bacteria and mold getting into your water. In addition, regular cleaning helps them operate at peak efficiency.

Hopefully, our comprehensive guide and tips have helped you understand how to clean Brita pitcher effectively. To be honest, it doesn’t take much effort if you follow the steps mentioned above. And once you understand it, you won’t have to think much and incorporate it into your daily cleaning routine!